Elmomc AC Input Digital Servo Drives-Tuba Bedienungsanleitung PDF herunterladen (Seite 16)

Tuba Installation Guide

MAN-TUBIG (Ver. 1.502)

www.elmomc.com

Chapter 3:

Installation

The Tuba must be installed in a suitable environment and properly connected to its voltage

supplies and the motor.

3.1. Before You Begin

3.1.1. Site Requirements

You can guarantee the safe operation of the Tuba by ensuring that it is installed in an

appropriate environment.

Feature Value

Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F)

Maximum relative humidity 90% non-condensing

Operating area atmosphere No flammable gases or vapors permitted in area

Models for extended environmental conditions are available.

Caution:

The Tuba dissipates its heat by forced ventilation (fan). The maximum operating

ambient temperature of 0 °C to 40 °C (32 °F to 104 °F) must not be exceeded.

3.1.2. Hardware Requirements

3.1.2.1. AC Input Requirements

Circuit Breakers &

Contacts

Three-Phase Supply

Voltage

Single-Phase Supply

Voltage

Circuit breaker current rating 150% to 200% of drive

current

200% to 300% of drive

current

Circuit breaker voltage rating 250 VAC / 480 VAC depending upon operating AC voltage

Contactor Up to 150% of drive current Up to 200% of drive current

3.1.2.2. Recommended Wire Cross-Sections (All Models)

Feature Connection Details

AC input AC1, AC2, AC3 4 to 5 mm

, 10 to 12 AWG

Motor M1, M2, M3 4 to 5 mm

, 10 to 12 AWG

Protective earth PE, PE 4 to 5 mm

, 10 to 12 AWG

Auxiliary power 24V +, – 0.5 to 1 mm

, 18 to 20 AWG

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 78 79

Kommentare zu diesen Handbüchern

Keine Kommentare

Elmomc AC Input Digital Servo Drives-Tuba Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Elmomc AC Input Digital Servo Drives-Tuba