Elmomc AC Input Digital Servo Drives-Bassoon Bedienungsanleitung PDF herunterladen (Seite 27)

Bassoon Installation Guide Installation

MAN-BASIG (Ver. 1.502)

www.elmomc.com

3.5.5. Main Feedback Cable (Port J3)

The main feedback cable is used to transfer feedback data from the motor to the drive.

The Bassoon accepts the following as a main feedback mechanism:

• Incremental encoder only

• Incremental encoder with digital Hall sensors

• Digital Hall sensors only

• Incremental Analog (Sine/Cosine) encoder (option)

• Resolver (option)

• Tachometer and potentiometer

• Absolute encoder

Connect the main feedback cable from the motor to the J3 port on the front of the Bassoon,

using a 12-pin Molex plug.

Notes:

• Connect the drain wire to pin 4. If the cable has no drain wire, connect the shield to pin 4.

• Ground the shield to the motor chassis.

Figure 11: The Main Feedback (J3) Cable

Drain Wire

or Shield

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 68 69

Keine Kommentare

Elmomc AC Input Digital Servo Drives-Bassoon Bedienungsanleitung Seite 27